Predefined Constants

The constants below are defined by this extension, and will only be available when the extension has either been compiled into PHP or dynamically loaded at runtime.

Constant Description
STREAM_FILTER_READ Used with stream_filter_append() and stream_filter_prepend() to indicate that the specified filter should only be applied when reading
STREAM_FILTER_WRITE Used with stream_filter_append() and stream_filter_prepend() to indicate that the specified filter should only be applied when writing
STREAM_FILTER_ALL This constant is equivalent to STREAM_FILTER_READ | STREAM_FILTER_WRITE
PSFS_PASS_ON Return Code indicating that the userspace filter returned buckets in $out.
PSFS_FEED_ME Return Code indicating that the userspace filter did not return buckets in $out (i.e. No data available).
PSFS_ERR_FATAL Return Code indicating that the userspace filter encountered an unrecoverable error (i.e. Invalid data received).
PSFS_FLAG_NORMAL Regular read/write.
PSFS_FLAG_FLUSH_INC An incremental flush.
PSFS_FLAG_FLUSH_CLOSE Final flush prior to closing.
STREAM_USE_PATH Flag indicating if the stream used the include path.
STREAM_REPORT_ERRORS Flag indicating if the wrapper is responsible for raising errors using trigger_error() during opening of the stream. If this flag is not set, you should not raise any errors.
STREAM_CLIENT_ASYNC_CONNECT Open client socket asynchronously. This option must be used together with the STREAM_CLIENT_CONNECT flag. Used with stream_socket_client().
STREAM_CLIENT_CONNECT Open client socket connection. Client sockets should always include this flag. Used with stream_socket_client().
STREAM_CLIENT_PERSISTENT Client socket opened with stream_socket_client() should remain persistent between page loads.
STREAM_SERVER_BIND Tells a stream created with stream_socket_server() to bind to the specified target. Server sockets should always include this flag.
STREAM_SERVER_LISTEN Tells a stream created with stream_socket_server() and bound using the STREAM_SERVER_BIND flag to start listening on the socket. Connection-orientated transports (such as TCP) must use this flag, otherwise the server socket will not be enabled. Using this flag for connect-less transports (such as UDP) is an error.
STREAM_NOTIFY_RESOLVE A remote address required for this stream has been resolved, or the resolution failed. See severity for an indication of which happened.
STREAM_NOTIFY_CONNECT A connection with an external resource has been established.
STREAM_NOTIFY_AUTH_REQUIRED Additional authorization is required to access the specified resource. Typical issued with severity level of STREAM_NOTIFY_SEVERITY_ERR.
STREAM_NOTIFY_MIME_TYPE_IS The mime-type of resource has been identified, refer to message for a description of the discovered type.
STREAM_NOTIFY_FILE_SIZE_IS The size of the resource has been discovered.
STREAM_NOTIFY_REDIRECTED The external resource has redirected the stream to an alternate location. Refer to message.
STREAM_NOTIFY_PROGRESS Indicates current progress of the stream transfer in bytes_transferred and possibly bytes_max as well.
STREAM_NOTIFY_COMPLETED There is no more data available on the stream.
STREAM_NOTIFY_FAILURE A generic error occurred on the stream, consult message and message_code for details.
STREAM_NOTIFY_AUTH_RESULT Authorization has been completed (with or without success).
STREAM_NOTIFY_SEVERITY_INFO Normal, non-error related, notification.
STREAM_NOTIFY_SEVERITY_WARN Non critical error condition. Processing may continue.
STREAM_NOTIFY_SEVERITY_ERR A critical error occurred. Processing cannot continue.
STREAM_IPPROTO_ICMP + Provides a ICMP socket.
STREAM_IPPROTO_IP + Provides a IP socket.
STREAM_IPPROTO_RAW + Provides a RAW socket.
STREAM_IPPROTO_TCP + Provides a TCP socket.
STREAM_IPPROTO_UDP + Provides a UDP socket.
STREAM_PF_INET + Internet Protocol Version 4 (IPv4).
STREAM_PF_INET6 + Internet Protocol Version 6 (IPv6).
STREAM_PF_UNIX + Unix system internal protocols.
STREAM_SOCK_DGRAM + Provides datagrams, which are connectionless messages (UDP, for example).
STREAM_SOCK_RAW + Provides a raw socket, which provides access to internal network protocols and interfaces. Usually this type of socket is just available to the root user.
STREAM_SOCK_RDM + Provides a RDM (Reliably-delivered messages) socket.
STREAM_SOCK_SEQPACKET + Provides a sequenced packet stream socket.
STREAM_SOCK_STREAM + Provides sequenced, two-way byte streams with a transmission mechanism for out-of-band data (TCP, for example).
STREAM_SHUT_RD Used with stream_socket_shutdown() to disable further receptions.
STREAM_SHUT_WR Used with stream_socket_shutdown() to disable further transmissions.
STREAM_SHUT_RDWR Used with stream_socket_shutdown() to disable further receptions and transmissions.
STREAM_CAST_FOR_SELECT Stream casting, for when stream_select() is calling stream_cast().
STREAM_CAST_AS_STREAM Stream casting, when stream_cast() is called otherwise (see above).
STREAM_META_TOUCH Used with stream_metadata(), to specify touch() call.
STREAM_META_OWNER Used with stream_metadata(), to specify chown() call.
STREAM_META_OWNER_NAME Used with stream_metadata(), to specify chown() call.
STREAM_META_GROUP Used with stream_metadata(), to specify chgrp() call.
STREAM_META_GROUP_NAME Used with stream_metadata(), to specify chgrp() call.
STREAM_META_ACCESS Used with stream_metadata(), to specify chmod() call.
STREAM_BUFFER_NONE No buffering.
STREAM_BUFFER_LINE Line buffering.
STREAM_BUFFER_FULL Full buffering.
STREAM_CRYPTO_METHOD_ANY_CLIENT Any TLS or SSL version on a client stream.
STREAM_CRYPTO_METHOD_SSLv2_CLIENT SSL 2.0 on a client stream.
STREAM_CRYPTO_METHOD_SSLv3_CLIENT SSL 3 on a client stream.
STREAM_CRYPTO_METHOD_SSLv23_CLIENT TLS 1.0, 1.1 or 1.2 on a client stream.
STREAM_CRYPTO_METHOD_TLS_CLIENT Any TLS version on a client stream.
STREAM_CRYPTO_METHOD_TLSv1_0_CLIENT TLS 1.0 on a client stream.
STREAM_CRYPTO_METHOD_TLSv1_1_CLIENT TLS 1.1 on a client stream.
STREAM_CRYPTO_METHOD_TLSv1_2_CLIENT TLS 1.2 on a client stream.
STREAM_CRYPTO_METHOD_TLSv1_3_CLIENT TLS 1.3 on a client stream.
STREAM_CRYPTO_METHOD_ANY_SERVER Any TLS or SSL version on a server stream.
STREAM_CRYPTO_METHOD_SSLv2_SERVER SSL 2 on a server stream.
STREAM_CRYPTO_METHOD_SSLv3_SERVER SSL 3 on a server stream.
STREAM_CRYPTO_METHOD_SSLv23_SERVER TLS 1.0, 1.1 or 1.2 on a server stream.
STREAM_CRYPTO_METHOD_TLS_SERVER Any TLS version on a server stream.
STREAM_CRYPTO_METHOD_TLSv1_0_SERVER TLS 1.0 on a server stream.
STREAM_CRYPTO_METHOD_TLSv1_1_SERVER TLS 1.1 on a server stream.
STREAM_CRYPTO_METHOD_TLSv1_2_SERVER TLS 1.2 on a server stream.
STREAM_CRYPTO_METHOD_TLSv1_3_SERVER TLS 1.3 on a server stream.
STREAM_CRYPTO_PROTO_SSLv3 Alias of STREAM_CRYPTO_METHOD_SSLv3_SERVER.
STREAM_CRYPTO_PROTO_TLSv1_0 Alias of STREAM_CRYPTO_METHOD_TLSv1_0_SERVER.
STREAM_CRYPTO_PROTO_TLSv1_1 Alias of STREAM_CRYPTO_METHOD_TLSv1_1_SERVER.
STREAM_CRYPTO_PROTO_TLSv1_2 Alias of STREAM_CRYPTO_METHOD_TLSv1_2_SERVER.
STREAM_CRYPTO_PROTO_TLSv1_3 Alias of STREAM_CRYPTO_METHOD_TLSv1_3_SERVER.
STREAM_IGNORE_URL Do not use plugin wrappers.
STREAM_MUST_SEEK Ensure stream is seekable. This may result in a copy of the stream being created.
STREAM_MKDIR_RECURSIVE Recursive flag for the options parameters of mkdir() and rmdir().
STREAM_IS_URL Indicates that the stream is a URL.
STREAM_URL_STAT_QUIET The wrapper should not raise any errors.
STREAM_PEEK Retrieve data from the socket, but do not consume the buffer. Subsequent calls to fread() or stream_socket_recvfrom() will see the same data.
STREAM_OOB Process OOB (out-of-band) data.
STREAM_OPTION_BLOCKING Set blocking/non-blocking mode on a stream.
STREAM_OPTION_READ_TIMEOUT Set read file buffering on a stream.
STREAM_OPTION_WRITE_BUFFER Set write file buffering on a stream.
STREAM_OPTION_READ_BUFFER Set read file buffering on a stream.

Note: The constants marked with + are meant to be used with stream_socket_pair(). Please note that some of these constants might not be available in your system.

Note: The STREAM_META_* constants are meant to be used with stream_metadata().

add a note

User Contributed Notes

There are no user contributed notes for this page.
To Top